NAND erase: device 0 offset 0x0, size 0x100000 You may need to try a few times, and from true power off state.Disconnect power from nsa310, press power button for 5 seconds (to make sure everything is discharged and power is off)Ĭapacity: 114473.4 MB = 111.7 GB ( 234441648 x 512 ) However this has not been tested successfully yet IP configuration described serial-install-problems-on-nsa310. In case you get below error message please use Setting up a TFTP server for TFTP Recovery/Install to load the files. Therefor send those commands in the U-Boot command line: The first step is to install OpenWrt's u-boot. Plug in the USB stick into the NAS (front USB) with the correct files and booting into u-boot (press any key on the serial communication to interrupt the boot progress).
